AutoStart is not working for Honda CRV 2015 Touring - Push to Start

Question

I installed a Fortin EVO-ONE with the THAR-HON3 T-harness on a 2015 Honda CR-V Touring Model Push-to-Start .
The module programs correctly, Dcryptor completed successfully, and CAN functions work (lock/unlock, ignition status).
However, the EVO-ONE never outputs ignition during remote start. 

Did Enabled option D2

Programmed Remote Started option Function 2 Mode 2

Programmed Remote Started option for R S OEM Remote Stand alone

Function 38 Mode 2

Getting Error while Decrypt Process - Decrpypt Limit has been reached for this Car.

Model - EVO-ONE

Date : 07/2025

SN : 002B04 734872

Appreciate your help to solve the issue please. 

Thanks

Answer 1

I am able to Start the car using factory remote with 3 times lock button.  When i enter the Car my Steering get locked and Push to Start Button also doesnt work to switch off the vehicle. Need to switched off the car using Key and then My car gets On using Push to Start button , then i can drive  well on the road.  Kindly advice how to remote Steering Autolock when using remote start with Key.
Thank you.

Answer 2

Hello,

I have submitted your module for reset.

It will be ready for use within 24 hours.

Program the module 1x start to finish to the vehicle to get remote start working again.

As inidcated on page 6 of the installation guide, there is no takeover for this vehicle, option D3 - door open shut down must be set in the evo-one options.

Best regards