Questions & Answers - Recent activity in Toyota

Reopened: Highlander

Thu, 22 Oct 2026 13:16:17 +0000

Two months ago, I installed an Evo-ALL module in a 2019 Highlander. The programming process proved difficult—the system only worked on the third attempt. The new module didn't work, so I used an old one instead.

The client called to say that the Fortin device has stopped working.

Is it possible that the vehicle has a factory-installed remote start system that is causing interference? Where should I look for it?

Answered: Car starter for a 2013 toyota Matrix - remote compatible

Wed, 21 Oct 2026 21:41:45 +0000

Hello,

What is written on the antenna? Normally located near the rear view mirror.

Best regards

Answered: reset flashing limits

Mon, 19 Oct 2026 12:08:22 +0000

Hello,

Modules with a manufacutre date older than 5 years cannot be reset or re configured. These modules dating from 2013 & 2015 falls into that category. If you wish to flash a module please use one that was manufactured within the last 5 years.

Best regards

Answered: Could you reset the flash limit for a evo all sn: 001A06756790

Thu, 15 Oct 2026 12:34:41 +0000

Hello,

Modules with a manufacutre date older than 5 years cannot be reset or re configured. This module dating from 2017 falls into that category. If you wish to flash a module please use one that was manufactured within the last 5 years.

Best regards

Answered: 2024 Prius

Wed, 07 Oct 2026 15:02:28 +0000

Hello,

Available guides for the 2024 prius prime can be seen here: https://fortin.ca/en/vehicles/toyota/prius-prime/2024-hybrid-push-to-start/compatibility/

Best regards

Answered: I'm installing my remote start kit, I'm not seeing any option to go to Pro mode.

Mon, 05 Oct 2026 12:07:15 +0000

Hello,

To access pro mode click on the gear icon in the upper right hand corner then click on go to pro mode.

Best regards

Answered: The evo one red, yellow, blue light never stop flashing on my 2011 tacoma

Mon, 28 Sep 2026 12:11:22 +0000

Hello,

What is the S/N number on the back of the evo-one module?

Best regards

Answered: Is LINKR-LT2 compatible with the EVO-ONE?

Mon, 28 Sep 2026 12:10:01 +0000

Hello,

Yes the LinkR-LT2 is compatible. Only difference is it will plug directly into the evo-one module as apposed to plugging into the toy16 t-harness.

It would use the same method as the mycar however i think the adapter has a different part number. https://fortin.ca/download/64631/MYCAR_REV20190703_64631.pdf

Best regards

Commented: Demande de réinitialisation du flash limit – EVO-ONE

Tue, 22 Sep 2026 12:10:06 +0000

Bonjours,
Je suggère de re faire la programmation du bypass dans le vehicle (page 5) https://fortin.ca/download/70381/EVO-ONE_IG_THR_BI_TOY6-Corolla-RAV4_2014_PTS_A_70381.pdf

Si sa démarre toujours pas a distance je suggère de amener le véhicules dans un garage pour être verifier par un tech. https://fortin.ca/fr/ou-acheter/installation/

Cordialement

Answered: FLASH LIMIT REACHED

Mon, 21 Sep 2026 11:59:08 +0000

Hello,

The flash limit has been reset.

Reopened: AutoMate

Thu, 10 Sep 2026 13:36:54 +0000

Hello. If you have instructions for programming the remote control for the Auto-Mate 4204A, please send them to me.The Rav4 has a remote autostart installed along with the Evo-All and we want to link a new remote to it.

Commented: 2023 Toyota Tacoma pts stuck at last step (Dcryptor)

Tue, 11 Aug 2026 12:03:53 +0000

You need to program the 942 remotes to the evo-one.

Make sure the antenna is plugged into the blue port on the side of the evo-one module, not the t-harness.

https://fortin.ca/download/69611/EVO-ONE_QG_RM942_EN_A_69611.pdf

Answer edited: Toyota Sienna 2023 Hybrid Push-to-Start with EVO-ONE-912 and THAR-ONE-TOY16. Is a 50 mA drain expected?

Tue, 28 Jul 2026 19:41:07 +0000

The EVO-ONE in sleep will draw +/- 12mA while the ANT900 antenna for the 912 remote will draw +/- 4mA.
The EVO-ONE will fall into sleep mode approximately 1 minute after the vehicle goes to sleep ( which can take over 45 minutes).

Note that even 60mA is high for the vehicle on its own. The vehicle is not in sleep yet or something else is preventing it from going into sleep. I believe 10mA is what you should see from just the vehicle.

Answered: EVO-ONE Installation in CAMRY 2026

Mon, 13 Jul 2026 13:46:06 +0000

1. Imi must be cut. The module is taking over temporatily providing key data.

2. the 54-pin is simply a connector located in the vheicle. It has no specific purpose aside from routing wires in the vehicle.

3. The ECU is where the t-harness connects to. It provides CAN and ignition/starter circuits. The wire-to-wire guide shows which circuits are being used at the ECU. https://fortin.ca/download/118441/EVO-ONE_IG_REG_BI_TOY-CAMRY-HYBRID_PTS_2025_A_118441.pdf

Answered: install Evo one on 2022 Toyota highlander

Thu, 02 Jul 2026 12:50:15 +0000

The installation of a remote starter on this vehicle requires an EVO-ONE (modules built since 2019 are all QR code). https://fortin.ca/en/vehicles/toyota/highlander/2022-push-to-start/compatibility/

There is no t-harness available, this is full wire to wire installation, information on wiring is available in the guide. We do suggest that all remote starter system be installed by a local shop familiar with aftermarket products such as remote starter systems.

Commented: 2024 Grand Highlander Dcryptor Procedure not working

Thu, 25 Jun 2026 12:40:40 +0000

Awesome glad that got it sorted for you, all the best!

Answered: Can I use a fortin evo-one remote start on an ‘01 Toyota Camry with an OEM remote?

Thu, 25 Jun 2026 12:40:09 +0000

Hello,

Yes you can use the evo-one for a 2001 Camry but no you cannot use the OEM remote to initiate remote start, an rf kit is required.

https://fortin.ca/en/vehicles/toyota/camry/2001-standard-key/compatibility/

Best regards

Answered: Reset Devices Resets

Thu, 25 Jun 2026 12:38:19 +0000

Hello,

I have reset the flash limit for you.

Best regards

Commented: 2019 Toyota Rav4 Push Start

Wed, 10 Jun 2026 12:14:30 +0000

Yes, the thar-toy13 is compatible with the 2019 rav4 pts.

Please note modules with a manufacture date of older than 5 years are not re configurable at the flash link.

https://fortin.ca/en/vehicles/toyota/rav4/2019-push-to-start/compatibility/

Best regards

Commented: Does Fortin support OEM remote start for 2026 Toyota Yaris GCC / Saudi Arabia models?

Wed, 20 May 2026 14:06:00 +0000

You can try reaching out to DriveX https://drivexsa.com/

Ask to speak with Ali, he may have a solution that will apply to your vehicle.

Best regards

Answered: Can you please reset my Evo-all module SN: 001A07458358

Tue, 12 May 2026 19:16:04 +0000

Hello,

The flash limit has been reset.

Best regards

Answered: Can you please reset my Evo-all module SN: 001A07458358

Mon, 11 May 2026 12:02:41 +0000

Hello,

The flash limit has been reset.

Best regards

Answered: Can you please reset my Evo-all module SN 003907027575

Thu, 30 Apr 2026 20:36:00 +0000

Hello,

No I cannot reset this module, please contact your point point of purhcase regarding the module.

Best regards

Answered: Flash Limit reached after firmware updated, can you reset my Fortin EVO-ONE SN: 002B04 697686

Mon, 20 Apr 2026 12:21:30 +0000

Hello,

I have submitted your module for reset, it will be ready for use within 24 hours.

Best regards

Module locking itself

Sat, 18 Apr 2026 09:38:38 +0000

I installed this evo all in my corolla with the TOY13 T harness back in 2022, and it worked flawlessly until maybe a year ago. The first odd issue was that it randomly started itself twice one day without me ever pressing the RF remote or activating it with the OEM remote. It didn't do that again after so I didn't think much of it. Then this year I found that my car was unlocked with the trunk open. After that instance I removed the starter and made sure to isolate all the wires that weren't used on the harness (Although this gave me no issues after 3 years), and I even did a master reset and reprogrammed it to the car. After maybe a month I noticed that the car would now start to randomly lock itself (again without me pressing anything on the remotes), and this has been the happening more frequently now. This is very odd and frustrating as the module was working perfectly for 3 years.

Commented: Remote only work if I push switch to "ON" on my 2020 Toyota Highlander

Thu, 16 Apr 2026 12:31:43 +0000

I see on 04/05/2026 you updated the firmware to 79.78 and re programmed it, I am guessing that had no affect on the rf kit?

The wire should to be present in 1 of the 2 locations. I have seen on vehicles without start/stop still have the green wire present and vice versa as well.

Please provide clear pictures of both the back side of the connectors/locations showing the pin outs as well what said connectors are plugged into in the vehicle. Perhaps this wil help shed light on the issue.

You are also still welcome to call in when you have the module, flasher and vehicle on hand so an agent can go over the programming of the remotes with you:

Mon - Fri

8am - 6pm est

1-877-336-7797

Best regards

Commented: Dcryptor Limit Has Been Reached

Tue, 14 Apr 2026 17:05:20 +0000

Thanks a lot!

Commented: Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461

Tue, 07 Apr 2026 02:21:54 +0000

Thank you for your support. However, how many times I’m allowed to do flashing before it get locked?

Answered: Drone or LTE mobile apps

Mon, 06 Apr 2026 12:14:10 +0000

Hello,

Evo-One can support evo-start-lte as well as the mycar ascl6 & 7.

Best regards

Closed: Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001462

Mon, 06 Apr 2026 12:12:46 +0000

Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461. It us evo-one.

Closed: Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461

Mon, 06 Apr 2026 12:12:27 +0000

Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461. It is evo one.

My Evo All in my 2021 corolla is unlocking/locking itself

Fri, 03 Apr 2026 16:20:07 +0000

Commented: Dcryptor Limit Has Been Reached

Mon, 30 Mar 2026 19:54:08 +0000

Happy to hear!

Answered: What’s the range of the phone application

Fri, 27 Mar 2026 13:51:53 +0000

Hello,

Evo start lte uses a cellular network to communicate so the range should be the same as a cell phone signal, so as long as you are within the coverage zone it should work, that being said things that will affect cellular coverage will also effect evo start lte, such as underground parking garages, hospitals etc.

Best regards

Commented: No parking lights

Thu, 26 Mar 2026 12:07:44 +0000

Here you go: https://cdn.fortin.ca/en/download/61931/61931.pdf

This reset is done in the vehicle, In your case since you have an evo one plug in the main 6 pin connector while holding down the programming button.

Answered: evonone toy16 in 2024 Tacoma Manual transmission. when the truck sits for about 10 mins it will not start remotely.

Wed, 25 Mar 2026 20:08:02 +0000

Hello,

There have been reports of the hvac operation not working as intended on manual transmission trims only when remote started. They truck will still remote start however the blower does not push any air.

Until this is addressed by Fortin engineering only the Automatic tranmission trim is currently being supported.

Best regards

Answer selected: 2007 rav4 (PTS) and Evo-Key

Wed, 25 Mar 2026 13:30:20 +0000

Hello,

Thank you for the feedback, glad it worked for you!

Best regards

Answered: Toyota T-harness for camry

Tue, 24 Mar 2026 15:56:02 +0000

Hello,

At this itme there is no t-harness available for the 03 Cmary, the installation is wire to wire.

https://fortin.ca/en/vehicles/toyota/camry/2003-standard-key/compatibility/

Best regards

Commented: NoParkingLightsDuringRemoteStart

Mon, 23 Mar 2026 15:31:51 +0000

Thank you for replying to my message

Answered: DCRYPTOR LIMIT HAS BEEN REACHED

Mon, 23 Mar 2026 12:08:43 +0000

Hello,

I have submitted your module for reset. It will be ready for use within 24 hours.

Best regards.

Answer selected: Old Firmware

Sat, 21 Mar 2026 02:36:14 +0000

Hello,

What is the S/N to the module?

Thank you.

Closed: Firmware for 2010 Rav4

Tue, 17 Mar 2026 12:54:48 +0000

Can you help me flash older firmware on my Evo-All? For example, from 79/56 to 79/65 ? S/N 001A08005655

Closed: OLD FIRMWARE

Tue, 17 Mar 2026 12:54:24 +0000

001A08005612

001A08005652

I am sending the S/N of the modules, that I could not program on the Rav4

Commented: تم الوصول إلى حد DCRYPTOR لهذه السيارة

Mon, 16 Mar 2026 14:33:44 +0000

Thank you very much

Dcryptor limit reached for this vehicle. Reset help?

Sat, 14 Mar 2026 19:17:54 +0000

I have an EVO-ALL and I am trying to setup my CarLINK ASCL7 on my 2019 Toyota Camry PTS to work with it and I've had to change some settings and swapping around the wiring harness. That still doesn't work but the Dcryptor limit has been reached for this vehicle. I need help resetting it.

Service # 001A07 662583

Also if anyone knows the correct flash manager settings and wiring harness setup that would be extremely helpful.

I can't get my Flash link mobile to detect my EVO-One

Sat, 14 Mar 2026 05:12:34 +0000

I can't get my Mobile Flash Updater to detect my EVO-One my s/n is dated 10/2025 SN: 002B04 743797

I have 2025 Toyota Corolla Cross XLE AWD Push to Start

Commented: Evo one reflash 002B07 136652 reset

Fri, 06 Mar 2026 21:36:18 +0000

Can i least change options in the bypass side? Firmware version is already the good one

thanks

Answered: 2005-2010 Toyota Tacoma remote start using factory remote

Fri, 13 Feb 2026 14:06:17 +0000

Hello,

3x lock is not officially supported for this generation of tacoma, rf kit is required.

https://fortin.ca/en/vehicles/toyota/tacoma/2009-standard-key/compatibility/

Yes with remote starter firmware 0.82, if the center pin of the shock sensor port is grounded 3 times it will initiate a remote start sequence.

Best regards

Reopened: 2024 CHR

Wed, 11 Feb 2026 18:56:18 +0000

I installed a 3xlock remote engine start on a 2024 CHR. Everything was the same as on a 2024 Prius Prime...only some of the wire colors were different.

Answered: 2023 Toyota Corolla evo one doesn’t go past step 5

Mon, 09 Feb 2026 21:45:18 +0000

After step 4, turn the car off first (step 5) and then start the vehicle (step 6). If the lights still do not change you will have to verify the IMI and IMO wiring.

https://fortin.ca/download/114521/EVO-ONE_IG_THR_BI_TOY17_COROLLA_2023_HKEY_B_114521.pdf